High Quality Colored HDPE Rod Customized HDPE Round Bar

• Customization: Available
• Material: PE
• Kind: Hard Plastic Rods
• Model NO.: XX-011
• Contraction Percentage: 0.4%~1.4%
• Tensile Strength: 30~40MPa
• Friction Coefficient: 0.12-0.15
• Breaking Elongation: >300%
• Molecular Weight: >500million
• Density: 0.93-0.97
• Dia.: 10-250mm
• Transport Package: Pallet or as Per Requirement
• Specification: customized
• Trademark: xinxing
• Origin: China
• HS Code: 3920109090
• Production Capacity: 99999999

Product Description

High quality Colored HDPE rod 

Colour : Black /white /red/yellow/orange/blue

HDPE rod thickness : 20-250mm

HDPE rod size: customized

High Density Polyethylene (HDPE) sheet is extremely strong against impact, abrasion resistant, and exhibits a low coefficient of friction. The material is also moisture, stain, and odor resistant, and is FDA approved for use in the food processing industry (mainly for cutting boards). The material's durability makes it a perfect match for a variety of applications such as water tanks, chute linings, bottle/bottle cap production and numerous other industrial uses. Borated HDPE offers radiation protection in nuclear facility applications.

Advantages
1.Abrasive resistance which always have in thermoelectricity polymer.
2.Best shock resistance even in low temperature.
3.Low frictional factor, and well sliding bearing material
4.lubricity( no caking, in adhesion)
5.Best chemical corrosion resistance and stress craze resistance
6.excellent machinery process ability
7.lowest water absorption(<0.01%)
8.paragon electric insulativity and antistatic behavior
9.nice high energy radioactive resistance
10. Density is lower than other thermoplastics (< 1g/m3)
11.long using temperature range: -269°C--90°C
HDPE  PHYSICAL PROPERTY TABLE

	Content/Feature/Property	Test method	Unit	Value
Mechanical property	Tensile strength	ISO 527-1, 2	Mpa	32
	Bending strength	ISO 178	Mpa
	Bending tensile stress	ISO 527	Mpa	30
	Stretching strain at break	ISO 527	%
	Tensile modules of elasticity	ISO 527	Mpa	900
	Compressive stress under 1% and 2% normal strain	ISO 604	Mpa	3/-
	Pendulum impact test	ISO 179/1eA	kj/m^2
	Rockwell hardness		HR
Physical property	Density	ISO 1183	g/cm^3	0.96
	Water absorption (23ºC water soak for 24 hours)	ISO 62	%
	Coefficients of linear thermal expansion (23-100ºC average value)		m/(m.k)	155×10^-6
	Flammability (UL)	UL94		HB
Heat resistance	Melting point		ºC	130
	Temperature resistance (continuous)		ºC	90
	Temperature resistance (short time)		ºC	110
Insulating property	Dielectric strength	ISO 60243	kv/mm	50
	Volume resistance	ISO 60093	Ω·cm	1O^15
	Surface resistance	ISO 60093	Ω	1O^16
	Relative permittivity -100HZ/1MHZ	ISO 60250		2.4/-
Chemical property	Acid resistance			+
	Alkali resistance			+
	Carbonation resistance			+
	Aromatic compounds resistance			0
	Ketone resistance			+
Other	Adhesion			+
	Friction coefficient			0.3
	Food contact			+

Remark:
1.Above data is only for reference.It may vary according to different processing method and sample.
2.These data can't be simply transferred to the finished parts.The applicability of materials for specific applications should be testes by the processor and user.
3.These technical parameters are used as a help.They do not represent a promise of performance.
4.Above specification "+" represents positive, "-" represents negative, "0" represents it depends.      

HDPE Rod Applications

High Density Polyethylene Rod is used for bearings, pulleys, bushes and low stress gears. HDPE Rod is the first choice for applications involving food, water and corrosive chemicals. Low water absorption, low coefficient of friction, high chemical resistance and economical cost are among the few standard benefits of HDPE Rod.

Related Prodects