Product Description
XINXING produce all kinds of UHMWPE rods icluding the round UHMWPE Rod and square UHMWPE Rod. Our UHMWPE bar can be various size according to customer requirements.
Green UHMWPE Bar, Red UHMWPE Bar, Yellow UHMWPE Bar, Black UHMWPE Bar, Blue UHMWPE Bar,etc .
All kinds of UHMWPE Bar is available with XINXING Company.
Shandong Ningjin Xinxing Chemical Co.,ltd have nearly 15 years in manufacturing the HDPE and UHMWPE products. Our factory is the biggest and our sevrice is best.
Specification
HDPE/UHMWPE Rods
Technical Data Sheet
| PROPERTIES |
Test Method |
Unit |
Value |
| I.Physical Properties |
| Density |
ISO 1183 |
g/cm3 |
0.95~0.96 |
| Water absorption 24hrs |
ISO 62 |
% |
0.01 |
| II.Thermal Properties |
| Heat deflection temperature - HDT/A |
ISO 75-2 |
ºC |
55 |
| Min. service temperature |
|
ºC |
-30 |
| Max. service temperature-Long Term |
|
ºC |
90 |
| Thermal conductivity at 23 ºC |
DIN 11359 |
W/(K*m) |
0.42 |
| Coefficient of linear thermal expansion |
ISO 11359 |
10-4*K-1 |
1.5 |
| Flammability Rating(6mm thickness) |
UL 94 |
- |
HB |
| III.Mechanical Properties at 23ºC |
| Tensile strength at yield |
ISO 527-2 |
MPa |
27 |
| Tensile strength at break |
ISO 527-2 |
Mpa |
35 |
| Elongation at break |
ISO 527-2 |
% |
700 |
| Modulus of elasticity after tensile test |
ISO 527-2 |
MPa |
1,000 |
| Modulus of elasticity after flexural test |
ISO 178 |
MPa |
1,000 |
| Hardness - Shore D |
DIN 53505 |
|
64 |
| Charpy impact strength |
ISO 179 |
kJ/m2 |
N. B. |
| Friction coefficient |
DIN 53375 |
|
0.3 |
| IV.Electrical Properties at 23ºC |
| Dielectric constant at 1 MHz |
IEC 60250 |
106Hz |
2.3 |
| Dielectric loss factor at 1 MHz |
IEC 60250 |
106Hz |
3.1 |
| Volume resistively |
IEC 60093 |
Ohm (Ω) * cm |
>1016 |
| Surface resisively |
IEC 60093 |
Ohm (Ω) |
>1015 |
| Dielectric strength |
IEC 60243-1 |
kV/mm |
17 |
| NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m |
| Name |
Round Solid UHMWPE Rod |
| Material |
PE,UHMWPE,HDPE |
| Color |
White,black,green,nature,blue,yellow,etc |
| Diameter |
5-200mm,or customized |
| Condition |
In stock/Made to order |
| Shape |
As per your drawing |
| Certification |
ISO9001:2008 |
| Free Sample |
Available |
| Shape |
Sheet, rod, tube, gear, rack,pulley, guide rail, Plastics fittings,and so on |
| Advantage |
One stop procurement |
| Packing |
Plastic bags,Cartons,Wodden case,Pallet,Container,etc. |
| Other |
24 hours instant and comfortable customer service. |
| Shipping status notification during delivery. |
| Regular notification of new styles & hot selling styles. |
Advantages
UHMW-PE Advantages:
Because of low coefficient of friction of UHMWPE materials, UHMWPE round bar will decrease the energy needed to operate machinery.
The agriculture industry has found that using UHMW-PE as opposed to steel in scraper applications realized increased fuel economy, reduced noise levels and increased wear resistance.
In material handling, the use of UHMW-PE sprockets and bearing surfaces have not only improved overall performance but also have extended the life of conveying systems.
In food handling systems UHMW-PE has eliminated the need for unwanted grease or oil lubricating methods, in fact, UHMW-PE is FDA and USDA approved for direct food contact.
UHMW-PE Rod Advantages:
Excellent impact resistance
High mechanical strength
Resistant to many solvents
Fantastic electrical insulator
Splendidt abrasion resistance
High damping properties
Continuous use temp. of -269 to 80 Deg. Cent.
Minimum water absorption (0.01%)
Extremely low co-efficient of friction
Chemical resistance: UHMWPE is resistant to acids, salts & salt solutions, alcohols, oils, fats, waxes & many solvents.
All PE material is affected by strong oxidizing agents such as chromic acid or halogens.
Aromatics and Halogenated hydrocarbons cause swelling.
Logo: Any logo you want
Molecular Weight: > 580 million
Shape: Rod, Square Rod, Bar
Company Profile
About Shandong Ningjin Xinxing Chemical Co.,Ltd.
With the excellent experience of many years in manufacturing engineering plastics, Xinxing was established in 1989. Now, it becomes the largest and most professional manufacturer of Engineer plastics such as UHMWPE Sheets, ground protection mats, crane outrigger pads, UHMWPE fender pads, wear-resisting liners, HDPE Sheets and parts, PP sheets and parts and other engineer plastics.
Our factory covers an area of 36000 square meters which has 7 big workshops for different products and application. Xinxing is the only manufacturer that produces both extruded and pressed plastic products in China and represents the most advanced productive forces and highest quality.
Our products are widely exported to many countries all over the world such as Indonesia, Malaysia, Korea, Japan, Russia, Germany, India, England, Italy, South America, Canada, Chile, etc.
Our management creed is "Quality first, Customer first, Keeping improving". We are willing to establish a wide and continuous cooperation with enterprises home and abroad. We sincerely hope to establish business relations with you.
If you have any other needs, please have a look at our related products.
We sincerely look forward to establishing business relationship with you. Please contact me if you have any other questions. I would like to help you in time.
){kind=link}