| Customization: | Available |
|---|---|
| Material: | PE |
| Kind: | Engineering Plastic Sheet |
|
Still deciding? Get samples of US$ 3/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
unbreakable engineering plastic ground mat, road protection mats , ground protectoin mats, construction mats, temporary floor mats
Xinxing ground protection mats are perfect for allowing access to construction sites, creating walkways for pedestrians, cars, vans, JCB, cranes over both natural and synthetic turf. Also they are ideal for ground protection over bog or wet areas or uneven surfaces. A superior alternative to plywood and steel, XINXING Light duty ground mats will not warp, rot, crack, delaminate or absorb harmful chemicals. Made of a special HDPE and UHMWPE. Can be used for temporary flooring in various situations.
| Unit | HDPE | |
| Mechanical Properties | ||
| Tensile strength | MPa | 23-26 |
| Flexural strength | MPa | 25-28 |
| Flexural modulus | MPa | 1936-1967 |
| Charpy Notched Impact Strength | KJ/m² | 5-6 |
| Poisson's ratio | (theoretical) | 0.35-0.38 |
| Compression testing(max value before test terminated) | Tons | 250 |
| General Properties | ||
| Density | KG/m³ | 940-965 |
| Shrinkage | % | 2-4 |
| Water absorption | % | 0.01 |
| Thermal expansion | e-6/K | 110-130 |
| Thermal conductivity | W/mk | 0.46-0.52 |
| Specific heat | J/kg.k | 1800-2700 |
| Melting temperature | ºC | 108-134 |
| Glass temperature | ºC | -110- +110 |
| Service temperature | ºC | -30- +85 |
| Resistivity | ohm.mm²/m | 5e+17-1e+21 |
| Break down potential | kV/mm | 17.7-19.7 |
| Dielectric loss factory | 0.0005-0.0008 | |
| Friction coefficient | 0.25-0.30 | |
| Refraction index | 1.52-1.53 |
| Factor | Value | ||
| HDPE | UHMWPE 100% RE | UHMWPE 50% RE | |
| Tensile Strength(MPa) | 22 | 25 | 28 |
| Notched Impacted Strength Kj/m2 | No break | No break | No break |
| Elongation at break (%) | >100% | >50% | >50% |
| Acids-concentrated | Good--Fair | Good-Fair | Good-Fair |
| Acids-dilute | Good | Good | Good |
| Aromatic hydrocarbons | Fair | Fair | Fair |
| Greases and Oils | Good-Fair | Good-Fair | Good-Fair |
| Halogenated Hydrocarbons | Fair-Poor | Fair-Poor | Fair-Poor |
| Halogens | Fair-Poor | Fair-Poor | Fair-Poor |
| Ketones | Good-Fair | Good-Fair | Good-Fair |
| Alcohols | Good | Good | Good |
| Alkalis | Good | Good | Good |
| Density(g/cm ) | 0.93-0.97 | 0.95-0.98 | 0.93-0.96 |
| Water absorption-over 24 hours (%) | <0.01 | <0.01 | <0.01 |
| Resistance to Ultra-violet | Fair | Fair | Fair |
| Radiation resistance | Fair | Fair | Fair |
| Dielectric constant@1MHz | 2.3-2.4 | 2.3 | 2.3 |
| Dielectric strength(KV/ mm) | 22 | 28 | 28 |
| Dissipation Factor@1MHz | 1-10*10 | 1-10*10 | 1-10*10 |
| Surface resistivity(Ohm/sq) | 10 | 10 | 10 |
| Volume resistivity(Ohm-cm) | 10 -10 | 10 | 10 |
| Size(mm) | Thickness with texture(mm) | weight (kg) |
Effective Surface Area(sqm) | Load Capacity (ton) |
Loading container |
| 2400*1200*12.7 | 22.7 | 40 | 2.88 | 40 | 320pcs in 20'GP 580pcs IN 40 'GP |
| 2440*1220*12.7 | 22.7 | 42 | 2.98 | 40 | 300pcs in 20 'GP 550PCS in 40'GP |
| 2000*1000*10 | 20 | 22.6 | 2.00 | 30 | 590pcs in 20'GP 1150pcs in 40'GP |
| 2900*1100*12.7 | 22.7 | 45 | 3.20 | 40 | 350pcs in 20'GP 580pcs in 40'GP |
| 3000*1500*15 | 25 | 74 | 4.50 | 80 | 320pcs in 40'GP |
| Item no | Size (mm) | Thickness with texture(mm) | Weight(kg) | Effective area(m2) | Loading capacity(ton) | Loading container and calculate |
| Xb01 | 5900*2000*28 | 38 | 345 | 11.8 | 120 | 76pcs in 40'HQ |
| Item no | Size (mm) | Thickness with texture(mm) | Weight(kg) | Effective area(m2) | Loading capacity(ton) | Loading container and calculate |
| Xp01 | 3000*2500*38 | 48 | 293 | 7.5 | 120 | 82pcs in 40'GP |
| Xp02 | 4500*2000*38 | 48 | 351 | 9.0 | 120 | 70 pcs in40GP |
| ITEM no | Size (MM) | Thickness with texture(mm) | Weight(kg) | Effective area(M2) | Loading capacity(ton) | Loading container and calculate |
| amphimat | 5930*2130*80 | 88 | 620 | 12.0 | 120 | 42pcsin 40'HQ |
Established in 1989, Xinxing has a history of 33 years in Manufacturing ENGINEERING plastics. Now it is the largest and most professional manufacturer of Engineering plastics, such as PP sheet / HDPE sheets, boards, rods, outrigger crane mats, marine fender boards, ground protection mats, rink ice and other machine processing parts.We have advanced extrusion and compression molded machines, CNC devices, can make any shape product according to customer's requirements. Xinxing has 3 banch factories which passed ISO9001 and ensure all of products compliance with its standard. Our products are used widely in electric power, ports, mining, coal, paper, textile, chemical industries. They are popular in Canada, USA, Russia, Japan, England, Indonesia, Malaysia, India, Italy, South Africa, Chile, Belgium, etc.
Producing machine of UHMWPE sheet for marine fender facing pad dock bumper
){kind=link}