Customized, Divisible, Extruded Plastic Bars, HDPE Polyethylene Plastic Rod/UHMWPE Solid Round Rod

• Customization: Available
• Material: PE
• Kind: Hard Plastic Rods
• Model NO.: XX325
• Contraction Percentage: ＜0.4%
• Tensile Strength: 81~130MPa
• Molecular Weight: > 580 Million
• Shape: Rod, Square Rod, Bar
• Logo: Any Logo You Want
• Breaking Elongation: > 300%
• Density: 0.93-0.97
• Abrasion: 80, Steel = 100
• UV: Anti-Ultra Violet
• Feature-1: Wear Resistant
• Feature-2: High Impact Resistant
• Feature-3: Chemical Resistant
• Feature-4: Waterproof
• Transport Package: Pallet
• Specification: 5-200mm, or customized (Diameter)
• Trademark: XINXING
• Origin: China
• HS Code: 3920109010
• Production Capacity: 500000pieces/Year

Product Description

Customized, Divisible, Extruded Plastic Bars, HDPE Polyethylene Plastic Rod/UHMWPE Solid Round Rod



Brief Introduction

XINXING produce all kinds of UHMWPE rods icluding the round UHMWPE Rod and square UHMWPE Rod. Our UHMWPE bar can be various size according to customer requirements.

Green UHMWPE Bar, Red UHMWPE Bar, Yellow UHMWPE Bar, Black UHMWPE Bar, Blue UHMWPE Bar,etc .
All kinds of UHMWPE Bar is available with XINXING  Company.

Shandong Ningjin Xinxing Chemical Co.,ltd have nearly 15 years in manufacturing the HDPE and UHMWPE products. Our factory is the biggest and our sevrice is best.








HDPE/UHMWPE Rods

Technical Data Sheet

PROPERTIES	Test Method	Unit	Value
I.Physical Properties
Density	ISO 1183	g/cm3	0.95~0.96
Water absorption 24hrs	ISO 62	%	0.01
II.Thermal Properties
Heat deflection temperature - HDT/A	ISO 75-2	ºC	55
Min. service temperature		ºC	-30
Max. service temperature-Long Term		ºC	90
Thermal conductivity at 23 ºC	DIN 11359	W/(K*m)	0.42
Coefficient of linear thermal expansion	ISO 11359	10-4*K-1	1.5
Flammability Rating(6mm thickness)	UL 94	-	HB
III.Mechanical Properties at 23ºC
Tensile strength at yield	ISO 527-2	MPa	27
Tensile strength at break	ISO 527-2	Mpa	35
Elongation at break	ISO 527-2	%	700
Modulus of elasticity after tensile test	ISO 527-2	MPa	1,000
Modulus of elasticity after flexural test	ISO 178	MPa	1,000
Hardness - Shore D	DIN 53505		64
Charpy impact strength	ISO 179	kJ/m2	N. B.
Friction coefficient	DIN 53375		0.3
IV.Electrical Properties  at 23ºC
Dielectric constant at 1 MHz	IEC 60250	106Hz	2.3
Dielectric loss factor at 1 MHz	IEC 60250	106Hz	3.1
Volume resistively	IEC 60093	Ohm (Ω) * cm	>1016
Surface resisively	IEC 60093	Ohm (Ω)	>1015
Dielectric strength	IEC 60243-1	kV/mm	17
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m

 

Name	Round Solid UHMWPE Rod
Material	PE,UHMWPE,HDPE
Color	White,black,green,nature,blue,yellow,etc
Diameter	5-200mm,or customized
Condition	In stock/Made to order
Shape	As per your drawing
Certification	ISO9001:2008
Free Sample	Available
Shape	Sheet, rod, tube, gear, rack,pulley, guide rail, Plastics fittings,and so on
Advantage	One stop procurement
Packing	Plastic bags,Cartons,Wodden case,Pallet,Container,etc.
Other	24 hours instant and comfortable customer service.
	Shipping status notification during delivery.
	Regular notification of new styles & hot selling styles.

UHMW-PE Rod Advantages:

Excellent impact resistance

High mechanical strength

Resistant to many solvents

Fantastic electrical insulator

Splendidt abrasion resistance

High damping properties

Continuous use temp. of -269 to 80 Deg. Cent.

Minimum water absorption (0.01%)

Extremely low co-efficient of friction

Chemical resistance: UHMWPE is resistant to acids, salts & salt solutions, alcohols, oils, fats, waxes & many solvents.
All PE material is affected by strong oxidizing agents such as nitric acid, chromic acid or halogens.
Aromatics and Halogenated hydrocarbons cause swelling. 

Logo: Any logo you want

Molecular Weight: > 580 million

Shape: Rod, Square Rod, Bar






About Shandong Ningjin Xinxing Chemical Co.,Ltd.

With the excellent experience of many years in manufacturing engineering plastics, Xinxing was established in 1989. Now, it becomes the largest and most professional manufacturer of Engineer plastics such as UHMWPE Sheets, ground protection mats, crane outrigger pads, UHMWPE fender pads, wear-resisting liners, HDPE Sheets and parts, PP sheets and parts and other engineer plastics.

Our factory covers an area of 36000 square meters which has 7 big workshops for different products and application. Xinxing is the only manufacturer that produces both extruded and pressed plastic products in China and represents the most advanced productive forces and highest quality.

Our products are widely exported to many countries all over the world such as Indonesia, Malaysia, Korea, Japan, Russia, Germany, India, England, Italy, South America, Canada, Chile, etc.

Our management creed is "Quality first, Customer first, Keeping improving". We are willing to establish a wide and continuous cooperation with enterprises home and abroad. We sincerely hope to establish business relations with you.







FAQ

Q1. Are you trading company or HDPE Rod manufacturer ?
A1. Yes,of course. We are factory, too.

Q2. Do you provide HDPE Rod sample?
A2. Yes, we could offer HDPE Rod sample for free charge. But we are sorry that we do not pay the cost of freight.

Q3. How long is your  delivery time?
A3. It mainly is according your quantity. Generally, it is 10 days if HDPE Rods are in stock. However, it is 15-20 days if HDPE Rods are not in stock.

Q4. What is your terms of payment?
A4. In summary, payment term is flexible. We accept T/T, L/C, Paypal and other terms. We a should open to dicuss.

Q5. Is there any warranty on the quality of your  products?
A5. About this question, please don't worry. We have more than 20 years of experience in producing  products widely used in Europe, Russia and other countries.

Q6. What about the after-sales service?
A6. You may rest assured that the quality of our products is always excellent. In addition, we will fix completely if our products have any problems that bring you some trouble.

Q7. Do you have complete inspection facilities ?
A7. Yes, of course. We will check the quality of the goods strictly before they are packed.

Q8. Are the specifications of your products all fixed?
A8. No, we can manufacture products of special specifications according to your requirements.


 
 

We sincerely look forward to establishing business relationship with you. Please contact me if you have any other questions. I would like to help you in time.