hdpe ground protection trackway mats system
Abrasion and impact resistant HDPE ground protection boards/mats are available for any ground condition including sandy, dirty, rocky, gravel or soggy lawn places. Rugged surface provides premium slip resistance even in rainy days.
It is easy to use. You just lay down the mats in the place where large machinery must drive for access. Not only for machinery access, it is often used as protection mats for portable roadways and walkways. Whatever soggy the condition is, you can go through without dirtying your shoes.
Reasons for replacing traditional materials
- Cost effective alternative to traditional materials, such as metal, wood, rubber
- Less wear - Reduce & eliminate wear on mating surfaces
- Higher performance - Plastics have outperformed other materials as much as 2 to 20 times. Lower coefficient of friction, reduced noise, reduced wear on mating surfaces, reduced electrical consumption, and steady bulk material flow
- Less abrasion - Material formulated to handle various types of abrasion
- Lower lubrication & maintenance - Can be eliminated or significantly reduced
- Reduced impact & vibration - Eliminate structural damage due to shock, vibration, and impact
- Corrosion resistant - Unaffected by most corrosive environments
- Improved safety. Reduced injuries & claims - Lighter than metals, easier to move around and handle
- Lighter weight - Easier handling and installation, and reduced shipping costs
- Lower material costs, reduce downtime, lower maintenance costs
- Reduced noise - Reduce/eliminate noise concerns
- Aesthetics - Modern-looking shapes & colors
Temporary Access Road Trackways HDPE ground mats,( Temporary Road Ways, beach access mats) designed to move large vehicles over lawns, sidewalks, driveways and more without causing damage. Our Anti-slip Lightweight Durable Plastic Construction Road Mat also prevents vehicles from getting stuck in muddy, wet, unstable ground conditions. Made from the highest-quality polymers, this Anti-slip Lightweight Durable Plastic Construction Road Mat will not rot or break. These mats are used as temporary roadway solutions for lawn protection, turf protection, and as flooring systems. They can be used in many industries
Item
No.
|
Size (mm)
|
Thickness with texture
(mm) |
Weigh
(kg)
|
Effective area
(m2)
|
Loading
capacity
(ton) |
Loading
Container & calculate |
| XE01 |
2400 x 1200 x 12.7
|
22.7 |
40 |
2.88 |
40 |
320 pcs in 20'GP
580 pcs in 40'GP |
| XE02 |
2440 x 1220 x 12.7
|
22.7 |
42 |
2.98 |
40 |
300 pcs in 20'GP
550 pcs in 40'GP |
| XE04 |
2000 x 1000 x 10
|
20 |
22.6 |
2.00 |
30 |
590 pcs in 20'GP
1150 pcs in 40'GP |
| XE05 |
2900 x 1100 x 12.7
|
22.7 |
45 |
3.20 |
40 |
590 pcs in 20'GP
1150 pcs in 40'GP |
| XE06 |
3000 x 1500 x 15
|
25 |
74 |
4.50 |
80 |
320 pcs in 40'GP |
Remark:
- Material : Virgin HDPE (high-density polyethylene)
- For wheeled vehicle
- Recommend thickness: 10 mm,12.7mm,15 mm,18 mm,20 mm and 25mm.
- Colour: white, black, red, yellow, blue and etc
- Pattern thickness on every side is 5 mm
|
Our lightweight composite PE paving slabs are mainly used in transportation, construction, and chemical industries. They are provided to crawler, automobiles, trucks, cranes, and temporary roads for large engineering vehicles. The vehicles can be padded during sand, muddy marshes and snow. Under the wheel, it acts to increase friction and ensure the safety of vehicle construction.
Emerging lightweight paving slabs are made of composite high-density polyethylene. They have good heat resistance and cold resistance, good chemical stability, corrosion resistance, high rigidity and toughness, dielectric properties and environmental stress crack resistance. Better, curved and continuous, is the best choice to replace wood and steel paving slabs. The weight is only one-seventh of the steel.
Advantage:
-- No matter what kind of terrain: sand, swamp, uneven or soft ground, skid plates can create a rapid road.
--In the landscaping project, grassland can be protected.
--Excellent alternative to plywood and fiberglass, high density polyethylene skid plates will not deform, rot, crack or delamination.
--Save time and labor when vehicles and equipment need to pass through unfavorable terrain.
--When vehicles and equipment move through the soil, potential damage to workers can be avoided.
--Vehicles and equipment can minimize wear and damage to vehicles and equipment when operating on uneven ground.
--Easy to carry, two people can carry it without expensive cranes.
--Connect with a metal connector.
--The raised pattern is simple in design and easy to clean.
--Durable, the load can reach 80 tons.
--It can still be used normally in extremely cold and hot weather.
--Reusable
Specification
Anti-slip type |
(A)Small Pattern (B)Large pattern (C)Smooth surface
1.AA 2.AB 3.AC 4.BB 5.BC (can be produced on demand)
|
Load bearing
|
Maximum load capacity of 80 tons (according to road conditions) |
Size
|
Upper thickness limit: 28 mm ± 0.5MM
Maximum width: 2400MM±5MM
Length: unlimited
Size is produced according to customer requirements |
Color type
|
Black, white, medium blue, earthy yellow, etc.;
According to customer needs, according to the color number. |
Applications
FAQ
1: Are you trading company or manufacturer ?
A: We are factory.
2: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if out of stock, also depends on the quantity.
3: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the 100*100mm sample for free charge but you pay the cost of freight.
4: What is your terms of payment ?
A:Payment term is flexible.we accept T/T,L/C,Paypal and the other terms.Open to discuss.
5. Is there any warranty on the quality of your products?
A: Please don't worry about that, we have 20 years of experience in producing UHMWPE products, our products widely used in Europe, the America and other countries.
6. What about the after-sales service?
A: We have years of guaranteed life, if our products have any problems, you can ask the feedback of our product termly, we will fix it for you or replace depending on the circumstances.
7. Do you inspect the your product?
A: Yes, each step of the production system and finished products will be carried out inspection by QC before shipping also.
8. Is the size of your products fixed?
A: No. we can meet your needs according to your requirements. That is to say, we accept any size.
9: How do you keep your long-term business relationship?
A: we keep good quality and competitive price to ensure our customers benefit. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Audited Supplier 
){kind=link}
){kind=link}