Radiation Shielding Boron-Containning UHMWPE Sheet

• After-sales Service: After Servie
• Warranty: 2years
• Material: PE
• Kind: Engineering Plastic Sheet
• Water Absorption: ＜0.01%
• Contraction Percentage: 2.0%~5.0%
• Model NO.: XX-013
• Tensile Strength: 23-27
• Friction Coeffecient: 0.12-0.15
• Transport Package: 40
• Specification: any size
• Trademark: Xinxing
• Origin: China
• HS Code: 3920109090
• Production Capacity: 999999

Product Description

Radiation Shielding Borated UHMWPE Sheets boron containing UHMWPE boards


Product Description


Xinxing Radiation Shielding boron loaded uhmwpe sheets was specially designed for nuclear shielding applications,and is used in a variety of applications including high intensity X-rays, cancer treatment facilities, nuclear submarines, and nuclear power plants.

 Product performance
 

Boron carbide content	10% (by weight) or specification
Density	acuity 1.028 g/cm3
Thermal deformation temperature (load rho = 0.46 M rho (a)	72 ºC
Linear expansion coefficient of	8.933 x 10-51 / ºC
Heat temperature	126 ºC (DTA measurements)
Thermal strength	material 24 mpa
The impact strength (gap)	19 kj/m2 material

hospital

5% Boron by weight to shield neutrons, are boron loaded PE(U)HMW grades. The high hydrogen content of PE (U)HMW makes it very suitable for slowing down fast neutrons to lower energy thermal (slow) neutrons, which are then absorbed by the added boron compound.
Whereas both PE-HMW and PE-UHMW are suitable for neutron shielding, PE-UHMW is often preferred because of its better deformation behaviour at high temperatures and its superior impact strength and wear resistance.

Borated PE Products:
 1.5% Boron ,   3% Boron,  5% Boron, 10% Boron , 15%Boron




Advantage: 

1,Have good irradiation resistance,

2,No activation products, secondary gamma ray energy is low;

3,Good chemical stability, corrosion resistance, non-toxic, no smell.

4,High mechanical strength, smooth surface, easy to facilitate decontamination, mechanical processing, the characteristics of easy installation and maintenance



How Can I Fabricate and Finish it?
Use standard woodworking tools: table saws, table routers, drills, blades and bits. Carbide router bits with two to four flutes are recommended.

How to Care and Store?

• Store the sheets flat on a level surface
• Keep away from teak oil and other products that can stain the finish
• Use china markers or water-based markers to draw patterns
• Pen marks can usually be removed with household cleaners
• Keep away from heat sources that exceed 180°F
• Because there is no grain, parts can be cut from any area of the sheet
• Save the scraps for small parts, shims, spacers and plugs

What are common applications?

• Airport Security and Sea Port Security
• International Border Security
• Doors for Linear Accelerators
• Medical Vaults 
• Nuclear-Powered Vessels
• Research Applications

Can I use a CNC machine?
Yes.

Will the material produce dust when fabricating?
No, only small shavings.